Fire & Ember Safe Vent Installation
Upgrade your vent to reduce exposure to wildfire with BRP Hardening Experts
Get an Estimate
Ember & Fire resistant Vents
Exterior/Interior Ember Mesh - $
- Installed on the exterior using mechanical fasteners
- Can be used on ALL vents, Fully Compliant, NON-CUSTOM ORDER
How Ember Vents Work
- Block Ember Intrusion
- Non-Combustible Materials
- Maintain Ventilation
- Comply with Standards
Framed Ember Mesh - $$
- Same performance as Ember Mesh, with a frame
- Higher Cost
- Custom ordered to fit your vent sizes (4-6 Weeks)
- Requires additional retrofit work for installation
- Not all types of vents come in framed mesh
How Fire-Resistant Vents Work
- Stops Wind Blown Embers
- Withstands Extreme Heat
- Heat-Activated Protection
- Maintain Proper Air Flow
- Tested to Wildfire Standards
Vulcan Ember & Fire Resistant- $$$
Brand Guard Ember & Fire Resistant- $$$$
Overlapping Baffles
Intumescent Strips
1/16″ Fine Mesh
Fire-Resistant Vent Installation
in the Greater Bay Area, San Diego Co., Orange Co. & Riverside Co.
When it comes to protecting your home from wildfire exposure, vents are one of the most overlooked vulnerabilities. Even if your roof, siding, and windows are upgraded, unprotected vents can allow embers to enter your attic or crawlspace—where they can ignite insulation, framing, or stored materials. Upgrading to fire-resistant vent systems is a simple but highly effective step in hardening your home and reducing wildfire risk.
How Are Vents Vulnerable?
Your home’s ventilation system is designed for airflow—not fire protection. Unfortunately, that makes vents a prime entry point during a wildfire.
- Direct ember intrusion: Attic and crawlspace vents can allow wind-driven embers to enter and ignite combustible materials inside your home.
- Debris accumulation: Inlet vents often collect dry leaves and vegetative debris, which can easily ignite when exposed to embers.
- Roof-level exposure: Ridge and off-ridge vents are especially vulnerable due to their location, where heat and embers naturally rise and concentrate.
- Flammable materials: Older vents made from plastic or low-grade materials can melt or fail when exposed to heat and flames, creating an open path for fire.
What to Do About It
Taking proactive steps to upgrade and maintain your vents can dramatically reduce your home’s fire risk:
- Upgrade to WUI-approved vents: Replace older vents with California State Fire Marshal-approved flame and ember-resistant models listed in the Wildland Urban Interface (WUI) Products Handbook.
- Install proper mesh protection: Cover existing vents with noncombustible, corrosion-resistant metal mesh sized between 1/16″ and 1/8″ (1/16″ preferred).
- Seal all gaps and edges: Use fire-resistant caulk or sealant around vent frames to block ember intrusion.
- Maintain proper clearance: Keep vents free of leaves, pine needles, and debris.
- Check vent sizing: Openings larger than 1/8″ should be upgraded or screened.
- Ensure airflow balance: Confirm compliance with local ventilation requirements.
- Schedule routine maintenance: Inspect and clean vents regularly to maintain performance.
Serving Fire-Prone Areas in California
We proudly provide fire-resistant vent upgrades and home hardening services throughout California, with a strong focus on wildfire-prone communities across the Bay Area, Southern California, and surrounding WUI regions. From the hills and canyon communities of the East Bay and North Bay to neighborhoods throughout San Diego County, Orange County, and Riverside County, we understand the unique wildfire risks, climate conditions, and exposure homeowners face across these areas.
Whether you’re in Danville, Alamo, Walnut Creek, Lafayette, Orinda, Berkeley Hills, Oakland Hills, San Rafael, Novato, Napa, Santa Rosa, San Diego, Carlsbad, Temecula, Irvine, Mission Viejo, Anaheim Hills, Riverside, or nearby communities, our team delivers fire-resistant vent solutions and home hardening upgrades designed to help reduce ember intrusion, improve defensible construction, and meet current building requirements and WUI standards.
Protect Your Home Before Fire Season
Wildfires move fast—but preparation doesn’t have to. Upgrading your vents is one of the most cost-effective ways to reduce risk and improve your home’s resilience. Working with an experienced, licensed contractor like BRP Hardening Experts ensures the job is done right without compromising ventilation or code requirements.
Get a Free Vent Assessment
Not sure if your current vents are up to standard? We can help. Request a quote online or call 925.322.1440, to get started—we’ll evaluate your current vent system, identify vulnerabilities, and provide clear, code-compliant recommendations to help protect your home from ember intrusion and fire exposure.
WILDLIFE MITIGATION SERVICES
Certified Wildfire Mitigation Specialists
Fuels Reduction & Weed Abatement
Defensible space is not just a landscaping issue — it is about understanding how wildfire behaves around your home.
Wind-driven embers, flames, and radiant heat can ignite vegetation and structures near the property. Proper defensible space helps reduce available fuel and slow the spread of fire.
The difference between land that is simply cleared and land that is truly defensible is understanding how fire approaches your specific property. Knowing where fire can intensify, where embers are likely to land, and what vulnerabilities exist around the structure comes from fire science, not just a checklist.